Tines
Spring Tine
| Part No | Description | Application |
|---|---|---|
| TI8-00912 Tine | Size: 45mm. Thickness: 8mm | Fits Case International Harvester & Massey Ferguson. Fits various combines and cultivators using 3/8" bolt. |
| TI8-00913 Helper | Size: 45mm. Thickness: 8mm. |
Front Mounted Coil Tines
| Part No | Description | Application |
|---|---|---|
| TI2-01480 | 25mm L/H Front Mounted | Various Size Toolbars: 2 x 7/16" hole & Slot at 46mm-53mm centres. |
| TI2-01481 | 25mm R/H Front Mounted | Tines are identified by standing at the rear of the implement and looking at the direction of travel. |
| TI2-01468 | 32mm L/H Front Mounted | If the coil is on RH of leg = RH tine. |
| TI2-01469 | 32mm R/H Front Mounted |
Rear Mounted Coil Tines
| Part No | Description | Application |
|---|---|---|
| TI2-01484 | 25mm L/H Rear Mounted | Various Size Toolbars: 2 x 7/16" hole & Slot at 46mm-53mm centres. |
| TI2-01485 | 25mm R/H Rear Mounted | Tines are identified by standing at the rear of the implement and looking at the direction of travel. |
| TI2-01472 | 32mm L/H Rear Mounted | If the coil is on RH of leg = RH tine. |
| TI2-01473 | 32mm R/H Rear Mounted. |
Vertical Mounted Coil Tines
| Part No | Description | Application |
|---|---|---|
| TI2-01488 | 25mm L/H Vert. Mounted | 2 x 7/16" hole & Slot at 46mm-53mm centres. |
| TI2-01489 | 25mm R/H Vert. Mounted | Tines are identified by standing at the rear of the implement and looking at the direction of travel. |
| TI2-01476 | 32mm L/H Vert. Mounted | If the coil is on RH of leg = RH tine. |
| TI2-01477 | 32mm R/H Vert. Mounted. |
Rigid Tines
| Part No | Description | Application |
|---|---|---|
| TI2-01535 | 25mm square 540mm long. | 2 x 7/16" hole & Slot at 46mm-53mm centres for Chisel Points. |
| TI2-01107 | 32mm square 785mm long. | 2 x 7/16" hole & Slot at 46mm-53mm centres for Chisel Points. |
Cultivator Shanks
| Part No | Description | Application |
|---|---|---|
| TI2-01536 | 32mm square 740mm long. | 3 x 3/8" holes at 32mm-57mm centres to suit Beet Hoe & Crescent Hoe Blades. |
Friction Trip Shanks
| Part No | Description | Application |
|---|---|---|
| TI8-01537 | 75mm x 25mm x 855mm. | 1 x 5/8" hole & 1 x 3/4" hole at 115mm centres for friction trips. |
Chisel Plow Tines
| Part No | Description | Application |
|---|---|---|
| TI8-01502 | Size: 50mm. Thickness: 25mm. | Shearer Trashworker Tine 668mm Clearance 9/16" hole/slot 53mm-87mm. Rep. P/N 13999. |
| TI8-01503 (Helper) | Size: 50mm. Thickness: 25mm. | Helper for TI8-01502 Trashworker Tine. |
| TI8-01512 | Size: 50mm. Thickness: 25mm. | Napier, Jarrett, Yeoman, John Berends. 530mm clearance. 9/16" holes @ 60mm centres. |