Agtuff Combine Points
61U Combine Bolt-On Point
| Part No | Description | Application |
|---|---|---|
| 61U x 4-AT Ag-Tuff | Size: 4". Thickness 6mm. | 38 Degree Fits Most makes. Fits Shearer, Ford, Gyral etc. |
| 61U x 5-AT Ag-Tuff | Size 5". Thickness 6mm. | Takes Crushed Cuphead Bolt: S4, S5 or S6 or Special Bolt: AG4, AG5, AG6, AG7 or AG8. |
| 61U x 6-AT Ag-Tuff | Size 6". Thickness 6mm | Use Tine Washer N538 |
| 61U x 7-AT Ag-Tuff | Size 7" Thickness 6mm | |
| 61U x 8-AT* Ag-Tuff | Size 8" Thickness 6mm |
65 Combine Bolt-On Point
| Part No | Description | Application |
|---|---|---|
| 65-AT | Size 12mm, Thickness 6mm | Lucerne Chisel. Fits most fluted tines. |
| Takes 3/8 or 7/16" Crushed Cuphead Bolt. Use AG2 or S4 & N538 washer. |
AA00715-AT Combine Bolt-On Point
| Part No | Description | Application |
|---|---|---|
| AA00715-AT Ag-Tuff | Size 40mm, Thickness 6mm | Aqua Point. Fits various tines with 7/16" hole. Takes 7/16" Crushed Cuphead Bolt S4 to S6 or Special Bolt: AG4 to AG8. |
16108 Series Combine Bolt-On Point
| Part No | Description | Application |
|---|---|---|
| 16108-AT Ag-Tuff | Size 8" Thickness 6mm. | 41 Degree Sweep. Fits Alfarm, Janke, Horwood Bagshaw AFM and others with 43 degree tine. |
| Takes Crushed Cuphead Bolt: S4 to S6 or Special Bolt: AG4 to AG8. |
M1 Marlow Combine Point Slip-On
| Part No | Description | Application |
|---|---|---|
| M1 x 4 1/2-AT Ag-Tuff | Size 4 1/2" Thickness 5mm. | 43 Degree Slip-On Point. Fits Massey Ferguson, Chamberlain etc.Takes Marlow Clip & Bolt Assy. |
M2 Marlow Combine Point Slip-On
| Part No | Description | Application |
|---|---|---|
| M2 x 2-AT Ag-Tuff | Size 2" Thickness 5mm | 46 Degree Slip-On Point. Fits Most makes of combines or cultivators. (Steeper set than M3) Takes Marlow Clip & Bolt Assy.. |
| M2 x 4-AT Ag-Tuff | Size 4" Thickness 5mm | |
| M2 x 5-AT Ag-Tuff | Size 5" Thickness 5mm |
M2Tx Marlow Combine Point Slip-On
| Part No | Description | Application |
|---|---|---|
| M2T x 6-AT Ag-Tuff | Size 6" Thickness 6mm | 46 Degree Slip-On Point. Fits Most makes of combines or cultivators with fluted or similar foot.(Steeper set than M3). |
| M2T x 7-AT Ag-Tuff | Size 7" Thickness 6mm | Takes Marlow Clip & Bolt Assy. |
M2LP Marlow Combine Point Slip-On
| Part No | Description | Application |
|---|---|---|
| M2LP-XAT Extra Ag-Tuff | Size 10mm, Thickness 5mm. | Lucerne Point. Fits Most makes of combines or cultivators. Takes Marlow Clip & Bolt Assy. |
M2SP Marlow Combine Point Slip-On
| Part No | Description | Application |
|---|---|---|
| M2SP-XAT Extra Ag-Tuff | Size 20mm Thickness 5mm. | Seeding Point. Fits Most makes of combines or cultivators. Takes Marlow Clip & Bolt Assy. 6" Long x 20mm wide |
M3 Marlow Combine Point Slip-On
| Part No | Description | Application |
|---|---|---|
| M3 x 4-AT Ag-Tuff | Size 4" Thickness 5mm. | 49 Degree Slip-On Point. Fits Most makes of combines or cultivators with fluted or similar foot.(Flatter set than M2). |
| M3 x 5-AT Ag-Tuff | Size 5" Thickness 5mm | Takes Marlow Clip & Bolt Assy. |
M3Tx Marlow Combine Point Slip-On
| Part No | Description | Application |
|---|---|---|
| M3T x 7-AT Ag-Tuff | Size 7" Thickness 6mm. | 49 Degree Slip-On Point. Fits Most makes of combines or cultivators with fluted or similar foot.(Flatter set than M2). Takes Marlow Clip & Bolt Assy. |
M4 Marlow Combine Point Slip-On
| Part No | Description | Application |
|---|---|---|
| M4SP-AT Ag-Tuff | Size 20mm" Thickness 5mm. | 52 Degree Slip-On Point. Fits Connor Shea wideline cultivator Fits Special MC21193 clip with N538 washer. |